Page 2389 - 1.0/2.3 to SHV RF Connector Datasheets

N Male Precision Connector Clamp/
Solder Attachment for PE-P142LL

RF Connectors
Technical Data Sheet PE44825

Assembly Instruction

ASSEMBLY PROCEDURES

1. SLIDE CLAMP NUT 7 OVER CABLE. STRIP CABLE AS SHOWN. DO NOT NICK
BRAID WHILE CUTTING JACKET.
.555
14.10
.395
10.03

7
2. INSERT CABLE INTO SOLDER FERRULE 6 UNTIL CABLE STOP THEN SOLDER
BOTH CABLE BRAIDS WHERE SHOWN. USING BLADES TO CUT DIELECTRIC
FLUSH WITH FACE OF FERRULE. DO NOT NICK CENTER CONDUCTOR.
SOLDER
DIELECTRIC
REMOVED

.220
5.59 6 7
REF
3. INSERT SPACER 5 AND CONTACT 4 INTO CALBE ASSEMBLY UNTIL STOP
AND SOLDER CONTACT 4 TO CENTER CONDUCTOR. REMOVE EXCESS
SOLDER. SLIDE INSULATOR 3 OVER CONTACT THEN INSERT CABLE
ASSEMBLY INTO BODY 1 & TIGHTEN. INSERT RUBBER GASKER 2 INTO BODY
COUPLING 1 .

SOLDER

2 1 3 4 5 6 7

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: N Male Precision Connector Clamp/Solder Attachment for PE-P142LL PE44825 -
Pasternack does not make
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation.

PE44825 REV 1.5 3