Page 2450 - 1.0/2.3 to SHV RF Connector Datasheets
P. 2450

N Male Low PIM Connector Clamp/Non-Solder Contact
     Attachment for 1/4 inch Superflexible, PE-1/4SFHC, IP67 Rated




     RF Connectors Technical Data Sheet                                                                    PE44726


                   Configuration
                       • N Male Connector                               • 1/4 inch Superflexible,  PE-1/4SFHC Interface Type
                       • IEC 60169-16                                   • Clamp/Non-Solder Contact Attachment
                       • 50 Ohms                                        • 19 mm Hex
                       • Straight Body Geometry                         • Low PIM Design
                   Features
                       • Max. Operating Frequency 3 GHz                 • Silver Plated Spring Copper Contact
                       • Excellent VSWR of 1.1:1                        • 5 µm minimum contact plating
                       • PIM levels lower than -160 dBc                 • IP67 Rated
                   Applications
                       • General Purpose Test           • Custom Cable Assemblies
                       • Wireless Communications        • Low PIM Applications
                   .
                   Description
                   Pasternack’s PE44726 type N male low PIM connector with clamp/non-solder contact attachment for 1/4 inch Superflexible
                   and PE-1/4SFHC is part of our full line of RF components available for same-day shipping. Our type N male connector
                   operates up to a maximum frequency of 3 GHz and offers excellent VSWR of 1.1:1. The type N male connector also has
                   low passive intermodulation of -160 dBc. The connector has an IP67 rating to protect against dust and temporary moisture
                   protection under immersion conditions.
                   Our type N male connector PE44726 datasheet specifications and drawing with dimensions are shown below in this PDF.
                   Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize
                   their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom
                   cable assembly configuration, Pasternack has the right connector for the job. Pasternack can also expertly build your custom
                   cable assemblies for you and ship same-day.

                   Electrical Specifications

                                 Description              Minimum        Typical       Maximum         Units
                       Frequency Range                       DC                            3             GHz
                       VSWR                                                              1.1:1
                       Insertion Loss                                                     0.1           dB
                       Passive Intermodulation                                           -160           dBc
                                           using 2x20W tones

                       Operating Voltage (DC)                                            1,700          Vdc
                       Dielectric Withstanding Voltage (DC)                              2,500          Vdc
                       Insulation Resistance                5,000                                      MOhms
                       .




                      Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
                      inventory and certifications: N Male Low PIM Connector Clamp/Non-Solder Contact Attachment for 1/4 inch Superflexible,
                      PE-1/4SFHC, IP67 Rated PE44726






                                                       PE44726  REV 1.1                                                1
   2445   2446   2447   2448   2449   2450   2451   2452   2453   2454   2455