Page 2457 - 1.0/2.3 to SHV RF Connector Datasheets

N Male Low PIM Connector Clamp/Non-Solder
Contact Attachment for PE-1/2FAC, 1/2 inch
Flexible, 1/2 inch Annular, IP67 Rated

RF Connectors Technical Data Sheet PE44735

Configuration
• N Male Connector face Type
• IEC 60169-16 • Clamp/Non-Solder Contact Attachment
• 50 Ohms • 19 mm Hex
• Straight Body Geometry • Low PIM Design
• PE-1/2FAC, 1/2 inch Flexible, 1/2 inch Annular Inter-
Features
• Max. Operating Frequency 3 GHz • Silver Plated Spring Copper Contact
• Excellent VSWR of 1.1:1 • 5 µm minimum contact plating
• PIM levels lower than -160 dBc • IP67 Rated
Applications
• General Purpose Test • Custom Cable Assemblies
• Wireless Communications • Low PIM Applications
.
Description
Pasternack’s PE44735 type N male low PIM connector with clamp/non-solder contact attachment for PE-1/2FAC, 1/2 inch
Flexible and 1/2 inch Annular is part of our full line of RF components available for same-day shipping. Our type N male
connector operates up to a maximum frequency of 3 GHz and offers excellent VSWR of 1.1:1. The type N male connector also
has low passive intermodulation of -160 dBc. The connector has an IP67 rating to protect against dust and temporary moisture
protection under immersion conditions.
Our type N male connector PE44735 datasheet specifications and drawing with dimensions are shown below in this PDF.
Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize
their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom
cable assembly configuration, Pasternack has the right connector for the job. Pasternack can also expertly build your custom
cable assemblies for you and ship same-day.

Electrical Specifications
Description Minimum Typical Maximum Units
Frequency Range DC 3 GHz
VSWR 1.1:1
Insertion Loss 0.1 dB
Passive Intermodulation -160 dBc
using 2x20W tones
Operating Voltage (DC) 1,700 Vdc
Dielectric Withstanding Voltage (DC) 2,500 Vdc
Insulation Resistance 5,000 MOhms
.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: N Male Low PIM Connector Clamp/Non-Solder Contact Attachment for PE-1/2FAC, 1/2 inch
Flexible, 1/2 inch Annular, IP67 Rated PE44735

PE44735 REV 1.1 1