Page 49 - 1.0/2.3 to SHV RF Connector Datasheets

1.0mm Female Connector Clamp/Solder (Captive Contact)
Attachment End Launch PCB, Removable End Launch, 0.35 Width

RF Connectors
Technical Data Sheet PE45403

Configuration
• 1.0mm Female Connector • End Launch Interface Type
• 50 Ohms • Clamp/Solder (Captive Contact) Attachment
• Straight Body Geometry
Features
• Max. Operating Frequency 110 GHz • Reusable end launch installation
• Good VSWR of 1.28:1 • PCB Solder or Solderless Contact
• Gold Plated Beryllium Copper Contact • Narrow width of 0.35
• Contact plating according to ASTM B488
Applications
• General Purpose Test • Signal Integrity Measurements • Substrate Characterization
• PCB Applications • Chip Evaluations • Test Fixtures
• Coplanar Waveguide Edge • SERDES
Launches • 25 GbE
.
Description
Pasternack’s PE45403 1.00mm removable end launch PCB connector is part of our full line of RF components available for
same-day shipping. Our 1.00mm solderless edge launch connector operates to a maximum frequency of 110 GHz and offers
an excellent VSWR of 1.28:1. The narrow 0.350 inch width connector body saves PCB real estate, supporting higher signal
counts for chip evaluations, signal integrity or millimeter wave applications.
Our 1.00mm solderless end launch PCB connector PE45403 datasheet specifications and drawing with dimensions are
shown below in this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to
configure and customize their signal connections however they like. Whether the need is to provide superior signal integrity,
higher data rates or simply a test fixture, Pasternack has the right high speed PCB edge launch connections for you.

Electrical Specifications

Description Minimum Typical Maximum Units
Frequency Range DC 110 GHz
VSWR 1.28:1
Insertion Loss 0.1 dB
Operating Voltage (AC) 650 Vrms
.
Performance by Frequency
Description F1 F2 F3 F4 F5 Units
Frequency Range DC to 18 18 to 40 40 to 50 50 to 67 67 to 110 GHz
VSWR, Max 1.15:1 1.15:1 1.18:1 1.25:1 1.28:1
.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 1.0mm Female Connector Clamp/Solder (Captive Contact) Attachment End Launch PCB, -
Removable End Launch, 0.35 Width PE45403 Pasternack does not make
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation.

PE45403 REV 1.4 1