Page 492 - 1.0/2.3 to SHV RF Connector Datasheets

4.3-10 Male Low PIM Connector Solder
Attachment for PE-1/4SFHC, IP67 Rated

RF Connectors Technical Data Sheet PE45298

Assembly Instruction

1. STRIP CABLE AS SHOWN, CHAMFER CENTER CONDUCTORS
AND DEBURR CABLE.

2. INSERT CENTER CONTACT AND LEAVE A 0.055 INCH (1.4mm) GAP,
CAN USE SOLDER GAUGE, BETWEEN CENTER CONTACT AND THE CABLE.
SOLDER CENTER CONTACT (IF USING A SOLDER GAUGE, PUSH CENTER
CONTACT TO GAUGE AND SOLDER).WRAP THE CABLE BY SOLDER WIRE
DIAMETER 0.031 INCH (0.8mm).

3. PUSH THE CONNECTOR BODY INTO THE CABLE, UNTIL IT STOPS.
SOLDER THE CONNECTOR BODY WITH CABLE.
1
2

3

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 4.3-10 Male Low PIM Connector Solder Attachment for PE-1/4SFHC, IP67 Rated PE45298 -
Pasternack does not make
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation.

PE45298 REV 1.1 3
1