Page 624 - 1.0/2.3 to SHV RF Connector Datasheets

7/16 DIN Male Low PIM Connector Clamp/Non-Solder Contact
Attachment for 1/4 inch Superflexible, PE-1/4SFHC, IP67 Rated

RF Connectors Technical Data Sheet PE44728

Configuration
• 7/16 DIN Male Connector • 1/4 inch Superflexible, PE-1/4SFHC Interface Type
• IEC 61169-4 • Clamp/Non-Solder Contact Attachment
• 50 Ohms • 32 mm Hex
• Straight Body Geometry • Low PIM Design
Features
• Max. Operating Frequency 3 GHz • Silver Plated Spring Copper Contact
• Excellent VSWR of 1.1:1 • 5 µm minimum contact plating
• PIM levels lower than -160 dBc • IP67 Rated
Applications
• General Purpose Test • Custom Cable Assemblies
• Wireless Communications • Low PIM Applications
.
Description
Pasternack’s PE44728 7/16 DIN male low PIM connector with clamp/non-solder contact attachment for 1/4 inch Superflexible
and PE-1/4SFHC is part of our full line of RF components available for same-day shipping. Our 7/16 DIN male connector
operates up to a maximum frequency of 3 GHz and offers excellent VSWR of 1.1:1. The 7/16 DIN male connector also has
low passive intermodulation of -160 dBc. The connector has an IP67 rating to protect against dust and temporary moisture
protection under immersion conditions.
Our 7/16 DIN male connector PE44728 datasheet specifications and drawing with dimensions are shown below in this PDF.
Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize
their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom
cable assembly configuration, Pasternack has the right connector for the job. Pasternack can also expertly build your custom
cable assemblies for you and ship same-day.

Electrical Specifications

Description Minimum Typical Maximum Units
Frequency Range DC 3 GHz
VSWR 1.1:1
Insertion Loss 0.1 dB
Passive Intermodulation -160 dBc
using 2x20W tones

Operating Voltage (DC) 2,700 Vdc
Dielectric Withstanding Voltage (DC) 4,000 Vdc
Insulation Resistance 10,000 MOhms
.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 7/16 DIN Male Low PIM Connector Clamp/Non-Solder Contact Attachment for 1/4 inch Super-
flexible, PE-1/4SFHC, IP67 Rated PE44728

PE44728 REV 1.1 1