Page 280 - 1.0/2.3 to SHV RF Connector Datasheets

2.92mm Male Connector Clamp/Solder (Captive
Contact) Attachment End Launch PCB,
Removable End Launch, Standard Profile

RF Connectors
Technical Data Sheet PE45509

Configuration
• 2.92mm Male Connector • End Launch Interface Type
• 50 Ohms • Clamp/Solder (Captive Contact) Attachment
• Straight Body Geometry
Features
• Max. Operating Frequency 40 GHz • Reusable end launch installation
• Good VSWR of 1.4:1 • PCB Solder or Solderless Contact
• Gold Plated Beryllium Copper Contact • M1.6-0.35 Mounting Screws
Applications
• General Purpose Test • Signal Integrity Measurements • Substrate Characterization
• PCB Applications • Chip Evaluations • Test Fixtures
• Coplanar Waveguide Edge • SERDES
Launches • 25 GbE
.
Description
Pasternack’s PE45509 2.92mm removable end launch PCB connector is part of our full line of RF components available for
same-day shipping. Our 2.92mm solderless edge launch connector operates to a maximum frequency of 40 GHz and offers a
low VSWR of 1.4:1. The clamp-on removable design allows this connector to be reused, supporting multiple chip evaluations,
signal integrity and millimeter wave applications.
Our 2.92mm solderless end launch PCB connector PE45509 datasheet specifications and drawing with dimensions are
shown below in this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers
to configure and customize their signal connections however they like. Whether the need is to provide superior signal
integrity, higher data rates or simply a test fixture, Pasternack has the right high speed PCB edge launch connections for you.

Electrical Specifications

Description Minimum Typical Maximum Units
Frequency Range DC 40 GHz
VSWR 1.4:1
Insertion Loss 0.38 dB
Operating Voltage (AC) 400 Vrms
.
Electrical Specification Notes:
Actual VSWR performance is largely dependent on circuit board design. For optimal results, the connector and circuit
launch geometry should be modeled using Electromagnetic Simulation tools.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 2.92mm Male Connector Clamp/Solder (Captive Contact) Attachment End Launch PCB, Re- -
movable End Launch, Standard Profile PE45509 Pasternack does not make
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation.

PE45509 REV 1.0 1