Page 3076 - 1.0/2.3 to SHV RF Connector Datasheets

SHV Plug Connector Clamp/Solder Attachment for RG174,
RG316, RG188, LMR-100, PE-B100, PE-C100, .100 inch

RF Connectors
Technical Data Sheet PE4498

Assembly Instruction

2

5
6 1

3
4

7

ASSEMBLY PROCEDURES
1. SLIDE CLAMP NUT 1 , THINNER WASHER 2 & GASKET 3 OVER CABLE. STRIP
CABLE AS SHOWN. DO NOT NICK BRAID WHILE CUTTING JACKET. TAPER END OF
BRAID TO PERMIT ASSEMBLY OF CLAMP.
.620
15.7

1 2 3
2. SLIDE BRAID CLAMP 4 OVER BRAID & SEATAGAINST CABLE. FORM BRAID OVER
CLAMP NUT. TRIM BRAID BACK TO SHOULDER. CUT DIELECTRIC & CENTER
CONDUCTOR TO DIMENSION SHOWN. DO NOT NICK CENTER CONDUCTOR.
.460
11.68

.150
3.81
1 2 3 4
3. SLIDE INSULATOR 5 AGAINST THE BRAID CLAMP. SOLDER CONTACT 6 TO
CENTER CONDUCTOR. REMOVE EXCESS SOLDER. DO NOT OVER HEAT DIELECTRIC.
INSERT CABLE ASSEMBLY INTO BODY 7 & TIGHTEN WITH RECOMMENDED TORQUE:
16 in-lbs.
5 INSULATOR

SOLDER

1 2 3 4 5 6 7

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SHV Plug Connector Clamp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-
B100, PE-C100, .100 inch PE4498

PE4498 REV 1.3 3