USA & Canada (866) 727-8376  International +1 (949) 261-1920

Click on the links below for more details

Pasternack's New Line of

  • 4 Successive Detection Log Video Amplifiers (SDLVA), 1 Detector Log Video Amplifier (DLVA)
  • Amplifiers offer broadband multi-octave performance from 0.5 GHz to 18 GHz
  • Log Video Amplifiers can process up to 75 dB of dynamic range
  • Log Linearity ranges from ± 1 dB to ± 2.5 dB
  • Lot Video Output Slope ranges from 20 to 50 mV/dB
  • Fast Recovery time ranges from 40 to 150 nsec
  • 50 ohm hybrid circuits enclosed in rugged metal packages with SMA connectors are highly reliable and designed to meet MIL-STD-202F environmental conditions
  • Guaranteed operating performance ranges from -40°C to +90°C
  • Models are EAR99 | No export license required

All in stock and ready for same-day shipping!

Part No.

Frequency
Band

(GHz)

Typical
Recovery
Time (ns)

Min TSS

(dBm)

Log

Linearity

(±dB)

Log Range

(dBm)

Rise Time

(ns)

Log Slope

(mV/dB)

Voltage

(±Volts)

"Mechanical Dimensions
L(in) x W(in) x H(in)"

Connector

Type

ECCN

500 MHz to 4 GHz, Log Amplifier, 25 mV/dB Log Slope, 70 dBm Log Range, SMA PE15A2000

0.5 - 4

40

-73 typical

2.5

-70 to 0

10

25

15

3.2 x 1.8 x 0.4

SMA

EAR99

                         
2 GHz to 6 GHz, Log Amplifier, 40 mV/dB Log Slope, 75 dBm Log Range, SMA PE15A2001

2 - 6

60

-73 typical

1.75

-70 to +5

25

40

15

3.75 x 1.5 x 0.5

SMA

EAR99

                         
6 GHz to 18 GHz, Log Amplifier, 25 mV/dB Log Slope, 70 dBm Log Range, SMA PE15A2002

6 - 18

70

-72

2.5 typical

-70 to 0

50

25

12

3.2 x 2.05 x 0.4

SMA

EAR99

                         
500 MHz to 18 GHz, Log Amplifier, 20 mV/dB Log Slope, 70 dBm Log Range, SMA PE15A2003

0.5 - 18

150

-65

1.75

-65 to +5

20

20

15

3.0 x 3.5 x 0.5

SMA

EAR99

                         
6 GHz to 18 GHz, Log Amplifier, 50 mV/dB Log Slope, 40 dBm Log Range, SMA PE15A2004

6 - 18

150

-40

1

-40 to 0

20

50

15

2.2 x 1.5 x 0.4

SMA

EAR99

                         

Microwave Broadband Log Video Amplifiers

Our log amplifiers are used to measure widely varying signals at high frequencies in applications where rapid and precise tracking is required across the entire frequency band. Signals with high density pulses, narrow pulse widths and large amplitude variations are compressed into an output video voltage response that increases linearly with increasing input power. Common applications for these RF amplifies are in radar and EW systems used for direction finding and power monitoring, but they can also find use in laboratory measurement and test equipment as well as telecommunications and data communications systems.

These new logarithmic video amplifiers utilize highly efficient GaAs semiconductor technology which is beneficial for high speed applications while maintaining flatness and accuracy throughout the desired frequency band. Our log amplifiers can process up to 75 dB of dynamic range and have log linearity that ranges from ±1 to ±2.5 dBm. The log slope ranges from 20 to 50 mV/dB and they also boast fast recovery times ranging from 40 to 150 nanoseconds. The 50 ohm hybrid circuit assemblies are enclosed in rugged metal packages with SMA connectors. They are highly reliable and designed to meet MIL-STD-202F environmental conditions.

 

RF Amplifiers Selection

Click a category for more details

For a complete list of Pasternack's products please click here

© Pasternack Enterprises, Inc. 1999-2016

 

Toll-free: 866-PASTERNACK (866-727-8376)

Phone: 949-261-1920

Fax: 949-261-7451