Page 1301 - RF Adapter Datasheets
P. 1301

N Male to N Male Right Angle Adapter





     RF Adapters Technical Data Sheet                                                                        PE9198


                   Configuration
                       • N Male Connector 1                             • 50 Ohms
                       • N Male Connector 2                             • Right Angle Body Geometry
                   Features
                       • Max VSWR of 1.5:1 up to 11 GHz                 • Gold Plated Brass Contact
                       • N Interface compliant with MIL-STD-348A        • 30 µ-in min Gold Contact Plating
                   Applications
                       • General Purpose Test
                   .
                   Description
                   Pasternack’s PE9198 type N male to type N male right angle adapter is part of our full line of RF components available for
                   same-day shipping. Our type N to type N adapter has a male to male gender configuration. PE9198 type N male to type N
                   male adapter operates to 11 GHz. The Pasternack RF adapter provides good VSWR of 1.5:1 maximum. This low profile right
                   angle type N adapter allows for easier connections in tight spaces.
                   RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain
                   adapter  configurations  can  also  be  used  to  protect  connectors  on  expensive  equipment  where  the  number  of  connect/
                   disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly
                   changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters
                   are referred to as connector savers. Pasternack also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and
                   isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.

                   Electrical Specifications

                                 Description              Minimum        Typical       Maximum         Units
                       Frequency Range                       DC                           11            GHz
                       VSWR                                                              1.5:1
                       Operating Voltage (AC)                                            1,000          Vrms
                       Dielectric Withstanding Voltage (AC)                              2,500          Vrms
                       . .


                   Mechanical Specifications
                       Size
                       Length                                            1.524 in [38.71 mm]
                       Width                                             0.827 in [21.01 mm]
                       Height                                            1.524 in [38.71 mm]
                       Weight                                            0.199 lbs [90.26 g]






                      Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
                      inventory and certifications: N Male to N Male Right Angle Adapter PE9198








                                                        PE9198  REV 1.1                                                1
   1296   1297   1298   1299   1300   1301   1302   1303   1304   1305   1306