Page 1373 - RF Adapter Datasheets
P. 1373

Low PIM N Female to N Female Adapter With Body Flats





     RF Adapters Technical Data Sheet                                                                      PE91140


                   Configuration
                       • N Female Connector 1                           • Low PIM Design
                       • N Female Connector 2                           • Straight Body Geometry
                       • 50 Ohms
                   Features
                       • Max VSWR of 1.2:1 up to 6 GHz                  • Silver Plated Beryllium Copper Contact
                       • PIM levels lower than -155 dBc                 • 5µm min Silver Contact Plating
                       • N Interface compliant with IEC 169-16, MIL-C-39012
                   Applications

                       • General Purpose Test
                   .
                   Description
                   Pasternack’s PE91140 Low PIM type N female to type N female adapter is part of our full line of RF components available for
                   same-day shipping. Our type N to type N adapter has a female to female gender configuration in a Low PIM design. PE91140
                   type N female to type N female adapter operates to 6 GHz. The Pasternack RF adapter provides excellent VSWR of 1.2:1
                   maximum and passive intermodulation of -155 dBc maximum.
                   RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain
                   adapter  configurations  can  also  be  used  to  protect  connectors  on  expensive  equipment  where  the  number  of  connect/
                   disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly
                   changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters
                   are referred to as connector savers. Pasternack also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and
                   isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.

                   Electrical Specifications

                                 Description              Minimum        Typical       Maximum         Units
                       Frequency Range                       DC                            6            GHz
                       VSWR                                                              1.2:1
                       Passive Intermodulation                                           -155           dBc
                         using 2x20W tones (800MHz)
                       Operating Voltage (AC)                                            1,000          Vrms
                       Dielectric Withstanding Voltage (AC)                              2,500          Vrms
                       . .
                       Electrical Specification Notes:
                       Values at 25°C, sea level.

                   Mechanical Specifications
                       Size
                       Length                                            1.5 in [38.1 mm]


                      Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
                      inventory and certifications: Low PIM N Female to N Female Adapter With Body Flats PE91140








                                                        PE91140  REV 1.1                                               1
   1368   1369   1370   1371   1372   1373   1374   1375   1376   1377   1378