Page 2141 - RF Adapter Datasheets

SMA Male to 7/16 DIN Female Adapter

RF Adapters Technical Data Sheet PE9411

Configuration
• SMA Male Connector 1 • 50 Ohms
• 7/16 DIN Female Connector 2 • Straight Body Geometry
Features
• SMA Interface compliant with MIL-STD-348 • Contact Plating per MIL-G-45204
• 7/16 DIN Interface compliant with MIL-C-39012 • Epoxy captivation
• Gold Plated Contact
Applications
• Allows Connection Between Series • General Purpose Test

.
Description
Pasternack’s PE9411 SMA male to 7/16 DIN female adapter is part of our full line of RF components available for same-day
shipping. The SMA connector mates mechanically with commercially available 3.5mm and 2.92mm (K) connectors. Our SMA
to 7/16 DIN adapter has a male to female gender configuration.
RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain
adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/
disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly
changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters
are referred to as connector savers. Pasternack also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and
isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.

Mechanical Specifications
Size
Length 1.56 in [39.62 mm]
Width 1.14 in [28.96 mm]
Weight 0.193 lbs [87.54 g]
.
Description Connector 1 Connector 2
Type SMA Male 7/16 DIN Female
Polarity Standard Standard
Interface Specification MIL-STD-348 MIL-C-39012
Contact Captivation Method Epoxy Epoxy
Hex Size 5/16 in.
Mating Torque 3 to 5 in-lbs [0.34 to 0.57 Nm]
.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Male to 7/16 DIN Female Adapter PE9411

PE9411 REV 1.1 1