Page 2151 - BNC to N RF Cable Assembly Datasheets

N Male to N Male Cable Using PE-P142LL Coax

RF Cable Assemblies Technical Data Sheet PE343

Power handling values are calculated based on Cable properties. Power handling will vary based on the actual VSWR
of the cable assembly.
Insertion Loss does not include the loss of the connectors. Insertion Loss is estimated as .05dB x SQRT (Frequency
GHz) per connector.

Mechanical Specifications
Cable Assembly
Diameter 0.822 in [20.88 mm]
.
Weight 0.12 lbs [54.43 g]
Cable
Cable Type PE-P142LL
Impedance 50 Ohms
Inner Conductor Type Solid
Inner Conductor Material and Plating Copper, Silver
Dielectric Type PTFE
Number of Shields 3
Shield Layer 1 Silver Plated Copper Tape
Shield Layer 2 Aluminum Polyester
Shield Layer 3 Silver Plated Copper Wire
Jacket Material FEP
Jacket Diameter 0.195 in [4.95 mm]
.
Repeated Minimum Bend Radius 1 in [25.4 mm]
Connectors

Description Connector 1 Connector 2
Type N Male N Male
Impedance 50 Ohms 50 Ohms
Contact Material and Plating Beryllium Copper, Gold Beryllium Copper, Gold
Contact Plating Specification ASTM-B488, 50µ Inch. ASTM-B488, 50µ Inch.
Dielectric Type PTFE PTFE
Outer Conductor Material and Plating Passivated Stainless Steel Passivated Stainless Steel
Outer Conductor Plating Specification SAE-AMS-2700 SAE-AMS-2700
Coupling Nut Material and Plating Passivated Stainless Steel Passivated Stainless Steel
Coupling Nut Plating Specification SAE-AMS-2700 SAE-AMS-2700
Hex Size 3/4 Inch 3/4 Inch
Torque 14 in-lbs [1.58 Nm] 14 in-lbs [1.58 Nm]
Body Material and Plating Passivated Stainless Steel Passivated Stainless Steel
.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: N Male to N Male Cable Using PE-P142LL Coax PE343

PE343 REV 1.2 2