Page 685 - TNC to Double Banana RF Connector Datasheets

PE4640 CAD Drawing
75 Ohm BNC Female Bulkhead Mount Connector Crimp/Solder
Attachment for RG179, RG187, .480 inch D Hole

APPROVED J.GARCIA THE INFORMATION AND DESIGN IN THIS DOCUMENT IS THE PROPERTY OF PASTERNACK CORPORATION. ALL RIGHTS RESERVED. 1 1 N/A REV C

DATE 02/28/19 SHEET OF SCALE

.587±.012 14.90±0.30 PE4640
REVISIONS .366 9.30 INSULATION .276 7.00 INSULATION FERRULE PART NUMBER

DESCRIPTION PCR PE4640 20190121 Pasternack Enterprises, Inc. P.O.Box 16759, Irvine, CA 92623. Phone: 1.949.261.1920 │ 1.866.727.8376 Fax: 1.949.261.7451 www.pasternack.com │ e-mail: sales@pasternack.com K.DANG

.020 +.000 -.004 -0.10 .173 4.40 DRAWN BY
REV. C 0.51 0.00 CAGE 53919

.503 +.005 -.000 12.78 +0.13 0.00 FRACTIONS ± 1/32 ANGLES ± 1° SIZE A

MOUNTING HOLE .465 11.80 CONTACT UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS TOLERANCES: .2 [5.08] .X=± .01 [ .25 ] .XX=± .005 [ .13 ] .XXX=± ALL DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. THIRD-ANGLE PROJECTION

.472 +.005 -.000 11.99 +0.13 0.00 .144 3.67

.106 2.70

17.5mm HEX.

FERRULE: .146 [3.70] / .185 [4.70] HEX. CRIMP TOOL
.134 3.40 .075 1.90 MAX. PANE; CONTACT: .071 [1.80] HEX. CRIMP TOOL.
.413 10.50 THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED.

INNER: SOLDER/CRIMP.
STRIPPING DIMENSIONS CABLE ATTACHMENT: OUTER: CRIMP. CRIMP SIZE REQUIRED:
1.158±.016 29.41±0.40 .807 20.50

.701 17.81
1/2-28 UNEF • • • •
75 Ohm BNC FEMALE BULKHEAD NOTES: 1. 2.
16mm HEX. Pasternack does not make -
.469 [11.90] .118 3.00
"D" FLAT
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation.

T-Rev.A
PE4640 REV 1.2 3